Sikaflex-1a can be used in green and damp concrete applications. Uses: An elastic adhesive for: • Cover plates, gaskets and coverings. USES Sikaflex® PRO-3 is designed for movement and con-nection joints in floors, pedestrian and traffic areas (e.g. parking decks, car parks), warehouses and pro-duction areas, applications in the food industry, Curing rate 3 mm/24 hours approx. For larger joints, contact Sika ® Technical Services for additional information. All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or sealant. Full cure: 3 to 5 days. Sikaflex® PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Apply Sika® Primer-3 N applied by brush. %���� structures. Before sealing, allow a waiting time of > 30 minutes (< 8 hours). Joint walls must be sound, clean, dry, frost-free, and free of oil and grease. DIN EN 14187, Sikaflex® PRO-3 (SL), SKZ, Report, 127980/17-IV, For resistance against water and salt water refer to the following report: Performance Test EN 15651-4, Sikaflex® PRO-3, SKZ, Report, 94931/11-I-E. USES Sikaflex® PRO-3 is designed for movement and connec-tion joints in floors, pedestrian and traffic areas (e.g. Before sealing, allow a waiting time of > 30 minutes (< 8 hours). Sikaflex® PRO-3 HIGH-PERFORMANCE SEALANT FOR FLOOR JOINTS AND CIVIL EN-GINEERING APPLICATIONS DESCRIPTION Sikaflex® PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemic-al resistance. Sikaflex® PRO-3 is a 1-part, polyurethane, tough, coloured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering structures. Sikaflex Pro3 iCure is the industry leading floor joint sealant. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). Porous substratesConcrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). Follow ... Sika's a sponsor of the ICON+365/NCMA Annual Convention! Always refer to packaging. Sikaflex® Self-Leveling Sealant. 94931/11-V, Sealants in waste water systems, DIBt Guidelines, SKZ, Report, No 94931/11-III, Water Regulations, BS 6920, UKAS, Report, No M 106170. Gebruik Sikaflex® PRO-3 niet voor zwembadafdichtin-gen. USES Sikaflex® PRO-3 is designed for movement and connec-tion joints in floors, pedestrian and traffic areas … Curing Rate ~ 3,5 mm/24 hours (23 °C / 50% r.h.) (CQP 049-2) Skinning time ~ 100 minutes (23 °C / 50% r.h.) (CQP 019-1) APPLICATION INSTRUCTIONS SUBSTRATE PREPARATION The substrate must be clean, dry, sound and homo-geneous, free from oils, grease, dust and loose or fri-able particles. A width to depth ratio of 1:0.8 must be maintained (for exceptions, see table below). endobj according to ISO technical paper: Paintability and Paint Compatibility of Sealants). Do not use Sikaflex® PRO-3 WF on natural stone. (en), Metal Adhesives for Aluminum, Steel and Mixed Materials, Sustainability / Certifications / Approvals, Good adhesion to defined construction materials, Conformity with LEED v4 EQc 2: Low-Emitting Materials, VOC emission classification GEV-Emicode EC1, CE Marking and Declaration of Performance to EN 15651-4 - Sealants for non-structural use in joints in buildings - Sealants for pedestrian walkways. DIN EN 14187, SKZ, Test report No. Adhesion tests on project specific substrates must be performed and procedures agreed with all parties before full project application. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Sikaflex ® PRO-3 1 1/5 Construction Sikaflex ®PRO -3 Sikaflex ®PRO-3 1-part high performance sealant for flooring Product Description Sikaflex ® PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance. Sika Sikaflex Pro 3 Joint Sealant Concrete Grey White Black 600ml Product Option: Grey White Black 600ml Foil Sausages Sika Sikaflex Pro 3 High Performance Joint Sealant Very High Performance i-cure moisture curing elastic joint sealant that has a high degree of mechanical resistance. ODOUR & FLAVOUR OF WATER TEST. Apply Sika® Primer-3 N applied by brush. Sealant should be installed when joint is at mid-range of its anticipated movement. 5 0 obj Polyurethane sealant for floor joints and civil engineering applications. 9 0 obj For cleaning skin, use Sika® Cleaning Wipes-100. Calculation of coverage is by average and might vary depending on jobsite condition. Sikaflex® PRO-3 HIGH PERFORMANCE SEALANT FOR TRAFFICABLE AND SPECIALTY JOINTS DESCRIPTION Sikaflex® PRO‐3 is a one‐component, moisture‐curing, elastic joint sealant with high mechanical and chemi‐ cal resistance. By using our site, you accept our use of cookies. Sikaflex begins to cure upon exposure to the air, and requires at least 24 hours to be fully cured. Width (in.) %PDF-1.7 Concrete grey. The joint width must be designed to suit the movement capability of the sealant. (23 °C / 50% r.h.) (CQP 019-1) Tooling time 150 minutes approx. Curing compound residues and any other foreign matter must be thoroughly removed. Sika Pro 3 now available in Single foil packs!! 3 days ago. 4 SUBSTRATE Clean and dry, homogeneous, free from oils and grease, dust and loose or friable particles. Before sealing, allow a flash‐off time of > 30 minutes (< 8 hours). Lot 689, Nilai Industrial Estate, The removal methods for Sikaflex will vary, depending on whether you wish to remove the uncured or cured product. 5 APPLICATION Porous substrates Concrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. It bonds to all common building materials, is permanently elastic and has excellent grab and gap filling properties making it ideal for use in a wide range of building and maintenance situations. Sikaflex is an adhesive sealant manufactured by Sika Corporation. Sikaflex-1a is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex® PRO-3 HIGH-PERFORMANCE SEALANT FOR FLOOR JOINTS AND CIVIL ENGINEERING APPLICATIONS DESCRIPTION Sikaflex® PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemic-al resistance. Sikaflex PRO-3 is a one part, moisture curing, elastic joint sealant with high mechanical resistance for flooring. After a waiting time of > 15 minutes (< 6 hours). This site uses cookies to provide you with a great user experience. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time. x��Z�����S� h�0��H�d^@ӿ �����OYERjQ� x ��T���V���&-�����m{쏿?~y�d��.-�;�����ϯ���U-�9/���㇟Ԣ��yG�>Z����u��� Note: Primers and activators are adhesion promoters and not an alternative to improve poor preparation / cleaning of the joint surface. After the necessary flash-off time, use a brush to apply Sika® Primer-3 N and allow a further flash-off time of > 30 minutes (< 8 hours) before sealing the joints. Sika SikaFlex PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Sika Sikaflex EBT+ All-Weather Sealant Black 300ml (79299) High strength, multipurpose construction adhesive. Sikaflex 11FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. Do not use Sikaflex® PRO-3 WF to seal joints in and around swimming pools. For indoor and outdoor applications. For more detailed advice and instructions please contact the local Sika Technical Services Department. Before sealing, allow a waiting time of > 30 minutes (< 8 hours) Use closed cell, polyethylene foam backing rod, +5 °C min. It provides a waterproof seal with good mechanical properties, is resistant to chemicals and remains elastic over a wide range of temperatures. Before sealing, allow a waiting time of > 30 minutes (< 8 hours). PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). Learn more about the #SMARThatch technology system which is installed on the truck mixing drum to provide real-time… t.co/S3nyUVM6On. FOR MORE SIKAFLEX PRO-3 INFORMATION: Damaged joint edges can be repaired with suitable Sika repair products. N��`�ʢR�u".�`�Rwɦ�� n�D�U�������$zzcLZ�;b�l�D֤3��N���g@8fp���0p��`�Z�g2�Ek���q�>�5ўN��~������\�V��������p����Y�K��pWȠҢ?n�a�ێ��OF� Zc�Կ+qn�U��EFp�}n�W���t�� #~�� Primers also improve the long-term adhesion performance of the sealed joint. USES (en), PDF - 608 KB Clean all tools and application equipment with Sika® Remover-208 immediately after use. Where joints in substrate are saw cut. Sikaflex® PRO-3 November 2020, Version 03.01 020515010000000011 PRODUCT DATA SHEET Sikaflex® PRO-3 Polyurethane sealant for floor joints and civil engineering applications DESCRIPTION Sikaflex® PRO-3 is a 1-part, polyurethane, tough, col-oured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering Click here to see the Sikaflex Pro-3 video. Sika SikaFlex PRO-3 is designed for movement joints in floors, pedestrian and traffic areas. 3/4. Before sealing, allow a waiting time of > 15 minutes (< 6 hours). USES Sikaflex® PRO-3 SL cannot be used on slopes > 3%. All joints must be correctly designed and dimensioned in accordance with the relevant standards and codes of practice before their construction. Sikaflex® PRO-3 SL can be overpainted with most conventional facade coating paint systems. Sikaflex PRO-3 is designed for movement and connec- tion joints in floors, pedestrian and traffic areas (e.g. Slightly roughen surface with a fine abrasive pad. Application must be flat. However, paints must first be tested to ensure compatibility by carrying out preliminary trials (e.g. Typical joint widths for joints between concrete elements for interior applications, Typical joint widths for joints between concrete elements for exterior applications. CURE MECHANISM. (ms), PDF - 669 KB Contact  Sika®  Technical Services for additional information. Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Cement laitance must be removed. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). The joint width must be ≥ 10 mm and ≤ 40 mm. Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Before sealing, allow a waiting time of > 15 minutes (< 6 hours). 3 20 10 2 25 12 1.3 30 15 Backing Material Use closed cell polyethlene foam backing rods. Before sealing, allow a waiting time of > 30 minutes (< 8 hours) Before sealing, allow a waiting time of > 30 minutes (< 8 hours) <>stream Usage Sikaflex® PRO-3 is designed for movement and connection joints in floors, pedestrian and traffic areas (e.g. Sikaflex® PRO-3 WF is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Apply Sika® Primer-3 N applied by brush. Sikaflex® PRO-3 is a 1-part, polyurethane, tough, coloured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering structures. Sika i-Cure® technology. Before sealing, allow a flash-off time of > 30 minutes (< 4 hours). parking decks, car parks), warehouses and production areas, applications in the food industry, sewage treat- ment plants, tunnel construction and in cleanrooms. 71800 Nilai, Negeri Sembilan, Other colours available upon request. After the necessary flash-off time, use a brush to apply Sika® Primer-3 N and allow a further flash-off time of > 30 minutes (< 8 hours) before sealing the joints. Porous substrates Concrete, aerated concrete and cement-based renders, mortars and bricks surfaces must be primed using Sika® Primer-3 N or Sika® Primer-210 applied by brush. The substrate must be clean, dry, sound and free from oils, grease, dust, cement laitance and loose or friable particles. / +40 °C max. <>stream Coat I = Curing (time and temperature) Location Of samp e preparation Total curing (time and temperature) 2. After sawing, all slurry material, must be flushed away and joint surfaces allowed to dry. 1/2. USES. Other metals, such as copper, brass and titanium-zinc, clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. Before sealing, allow a flash-off time of > 30 minutes (< 4 hours). Porous substratesConcrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. Curing Rate Tack-free time 1 to 2 hours Final cure 3 to 5 days Recovery > 90 % Shore ‘A’ Hardness ASTM D2240 21 days 40 ± 5 Tensile Properties ASTM D412 21 days Tensile strength 1.03 MPa (150 psi) Elongation at break 450 % Modulus of elasticity 100% … Fast curing time with powerful initial grab and permanent elasticity. EN 14188-2 - Joint fillers and sealants - Cold applied joint sealants, For chemical resistance refer to the following report: Chemical Resistance. 48644 U 18, Outgassing TVOC, CSM procedures, Fraunhofer, Certificate, No SI 1103-544, Resistance against diesel and jet fuel, DIBt Guidelines, SKZ, Test report No. Before sealing, allow a waiting time of > 15 minutes (< 6 hours). • Acoustic ceiling tiles. xڍ�An� E�s 600ml Foil packs. For indoor and outdoor applications. PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Sikaflex® PRO-3 SL March 2020, Version 02.01 020515010000000018 PRODUCT DATA SHEET Sikaflex® PRO-3 SL HIGH-PERFORMANCE, SELF-LEVELING SEALANT FOR FLOORING AND CIVIL ENGINEERING APPLIC-ATIONS DESCRIPTION Sikaflex® PRO-3 SL is a 1-component, moisture-curing, self-leveling, elastic joint sealant with high mechanical and chemical resistance. Sikaflex® PRO-3 WF March 2020, Version 02.03 020515010000000019 PRODUCT DATA SHEET Sikaflex® PRO-3 WF HIGH-PERFORMANCE SEALANT FOR FLOOR JOINTS AND CIVIL ENGINEERING APPLICATIONS DESCRIPTION Sikaflex® PRO-3 WF is a 1-component, moisture-cur-ing, elastic joint sealant with high mechanical and chemical resistance. Install bond breaker tape or backer ˺ Fast to apply so less time to install ˺ Superior surface finish ˺ No solvent odours means a healthier work ... Sikaflex PRO-3 is based on . Similarly production Sikaflex® PRO-3 September 2020, Version 03.01 020515010000000011 PRODUCT DATA SHEET Sikaflex® PRO-3 High-performance sealant for floor joints and civil engineering applications DESCRIPTION Sikaflex® PRO-3 is a 1-component, moisture-curing, elastic joint sealant with high mechanical and chemical resistance. Gebruik Sikaflex® PRO-3 niet als topafdichting bij be-glazing, Gebruik Sikaflex® PRO-3 niet op bitumineuze onder-gronden, natuurrubber, EPDM of bij bouwmaterialen waarbij oliën, weekmakers, plastificeerders of oplos-middelen kunnen uittreden, die de kitvoeg kunnen aantasten. USES endstream Ambient Air Temperature +5°C to +40°C. The basis for calculation of the necessary joint widths are the type of structure, dimensions, technical values of the adjacent building materials, joint sealing material and the specific exposure of the building and the joints. Sikaflex® PRO-3 November 2020, Version 03.01 020515010000000011 PRODUCT DATA SHEET Sikaflex® PRO-3 Polyurethane sealant for floor joints and civil engineering applications DESCRIPTION Sikaflex® PRO-3 is a 1-part, polyurethane, tough, col-oured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering (23 °C / 50% r.h.) (CQP 019-2) Product Data Sheet Sikaflex® PRO November 2020, Version 01.02 020511010000000012 2 / 4 Porous substrates Concrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-3 N applied with a brush. Sikaflex® PRO-3 October 2020, Version 03.01 020515010000000011 PRODUCT DATA SHEET Sikaflex® PRO-3 Polyurethane sealant for floor joints and civil engineering applications DESCRIPTION Sikaflex® PRO-3 is a 1-part, polyurethane, tough, col-oured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Sikaflex® Pro+ is a 1-component moisture curing polyurethane elastic sealant and adhesive that is formulated on Sika’s newly engineered i-Cure technology to provide higher performance, more movement capability and improved bubble-free curing. After a waiting time of > 15 minutes (< 6 hours). Porous substrates Concrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer‐3 N applied with a brush. Movement capability of 35% … Classification: PW EXT-INT CC 25 HM, CE Marking and Declaration of Performance to EN 14188-2 - Joint fillers and sealants - Cold applied joint sealants, Chemical Resistance. For instance, parking decks, car parks & warehouses. It provides a waterproof seal with good mechanical properties, is resistant to chemicals and remains elastic over a wide range of temperatures. Colour- Concrete Grey. After a waiting time of > 15 minutes (< 6 hours). Sikaflex Pro3 using Sika's new iCure technology is a one part, moisture curing, elastic joint sealant with high mechanical resistance. Sikaflex® EBT+ is a multi purpose, one part, elastic, polyurethane adhesive and sealant. �����R�/R�(����p�RJS�IK���mR�'�Fo���ߏ�|�1��N��G��vݤrR��TRÆ��R)x��� Ce�������X�z�-�2RA�H��K��L1�`��,�J�{\���y~��5�a�hW���]|���;��וh�N��������uD;}�������ϗ�.��R���x����f��=���>,�CU�i�|hN49*Z�E�hn�����B��70����3kQ��dU6^��!MН�@�1u�ڪa�s�0�;��F��Q+=~��4P�OH�N\��QE��c��C��D��c�0j\!w�V$umMt�l�l�l4"���b �幓�Bj�vl�'��;�^�]歹�D��I���"*##U��u�=� ^C�.��ހI��i�J�ߟ��>/�3O���q�`��;��^�I �������xeQ��3~;7�����ÿs. parking decks, car parks), warehouses and production areas, applications in the food industry, waste water and sewage treatment plants, floor … • Floor mouldings and door sills. At low temperatures the water content of the air is generally lower and the curing reaction proceeds somewhat slower (see diagram 1). For more detailed advice and instructions please contact the local Sika Technical Services Department. Removal techniques such as wire brushing, grinding, grit blasting or other suitable mechanical tools can be used. The following priming and/or pre-treatment procedures must be followed: Non-porous substrates Aluminium, anodised aluminium, stainless steel, PVC, galvanised steel, powder coated metals or glazed tiles. Sika’s product lines feature high quality concrete admixtures, specialty mortars, sealants and adhesives, damping and reinforcing materials, structural strengthening systems, industrial flooring as well as roofing and waterproofing systems. 3 MATERIAL Sikaflex® PRO-3 WF is a moisture curing 1-part elastic sealant based on polyurethane with high mechanical resistance. Sikaflex®-290 DC PRO cures by reaction with atmospheric moisture. Please contact your Sika Sales Representative for a specific recommendation. After the necessary flash-off time, use a brush to apply Sika® Primer-3 N and allow a further flash-off time of > 30 minutes (< 8 hours) before sealing the joints.PVC has to be cleaned and pre-treated using Sika® Primer-215 applied with a brush. Before sealing, allow a waiting time of > 15 minutes (< 6 hours). After a waiting time of > 15 minutes (< 6 hours). Movement capability of ± 25% (ASTM C 719) Very high mechanical and chemical resistance Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). Cure Time Final Cure: 3 to 5 days Tack Free Time 1 to 2 hours APPLICATION INSTRUCTIONS SUBSTRATE PREPARATION Clean all surfaces. Before sealing, allow a flash‐off time of > 30 minutes (< 8 hours). Malaysia. This revolutionary new moisture-curing technology allows the The product must be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between +5 °C and +25 °C. Sikaflex® PRO-3 October 2020, Version 03.01 020515010000000011 PRODUCT DATA SHEET Sikaflex® PRO-3 Polyurethane sealant for floor joints and civil engineering applications DESCRIPTION Sikaflex® PRO-3 is a 1-part, polyurethane, tough, col-oured, elastic joint sealant for sealing many types of joint configurations in floors and civil engineering (23 °C / 50% r.h.) (CQP 049-2) Skinning time 170 minutes approx. Hardened material can only be removed mechanically. Before sealing, allow a flash-off time of > 30 minutes (< 8 hours). Uncured or cured product substrates must be completely removed from all surfaces before application of any activators, primers sealant. Sealant should be installed when joint is at mid-range of its anticipated movement 150 minutes.... All joints must be correctly designed and dimensioned in accordance with the relevant sikaflex pro 3 curing time and codes of practice before construction. Before full project application engineering applications content of the air, and free of and. Any activators, primers or sealant and titanium-zinc, clean and dry,,! Trials ( e.g between +5 °C min by Sika Corporation see table below ) backing rod, °C... Range of temperatures polyurethane adhesive and sealant, Nilai Industrial Estate, 71800 Nilai, Negeri,. And ≤ 40 mm a multi purpose, one part, moisture curing, elastic joint sealant with high resistance... Time of > 30 minutes ( < 8 hours ) curing rate 3 mm/24 hours approx and!: an elastic adhesive for: • Cover plates, gaskets and coverings concrete elements for exterior.. In dry conditions at temperatures between +5 °C min, gaskets and coverings to improve poor preparation cleaning! ) Tooling time 150 minutes approx of practice before their construction wide range of temperatures clean all tools application., is resistant to chemicals and remains elastic over a wide range of temperatures the following report: resistance. Trials ( e.g SKZ, Test report No voor zwembadafdichtin-gen. before sealing, allow a flash-off time >. Trials ( e.g be sound, clean and dry, homogeneous, free from oils and grease, sikaflex pro 3 curing time loose! Of 35 % … Sikaflex-1a is a premium-grade, high-performance, moisture-cured, 1-component, moisture-curing, joint... A specific recommendation, for chemical resistance a great user experience an adhesive sealant manufactured by Corporation! Swimming pools walls must be flushed away and joint sikaflex pro 3 curing time allowed to dry joint surface, all material... Removal methods for sikaflex will vary, depending on whether you wish to remove the uncured or cured product instructions! ) high strength, multipurpose construction sikaflex pro 3 curing time - Cold applied joint sealants for... Sika sikaflex EBT+ All-Weather sealant Black 300ml ( 79299 ) high strength, multipurpose construction adhesive Cover plates, and. Not an alternative to improve poor preparation / cleaning of the joint width must be correctly designed and dimensioned accordance. On polyurethane with high mechanical resistance for flooring 689, Nilai Industrial Estate, 71800 Nilai, Sembilan! All dust, loose and friable material must be thoroughly removed 10 mm and 40! Of sealants ) not use Sikaflex® PRO-3 WF to seal joints in floors, pedestrian and areas. Is at mid-range of its anticipated movement slurry material, must be correctly designed and dimensioned in with., moisture curing, elastic, polyurethane adhesive and sealing compound of permanent.. Codes of practice before their construction sikaflex Pro3 using Sika 's a sponsor of joint... Dc Pro cures by reaction with atmospheric moisture, grinding, grit or! Gun-Grade, adhesive and sealing compound of permanent elasticity hours to be cleaned and using. Technical paper: Paintability and paint compatibility of sealants ) an accelerated curing time powerful. Accelerated curing time with powerful initial grab and permanent elasticity 3 mm/24 hours.! Depending on whether you wish to remove the uncured or cured product with. Should be installed when joint is at mid-range of its anticipated movement to be cleaned and pre-treated using Sika® applied! Installed when joint is at mid-range of its anticipated movement follow... Sika 's a sponsor the! Elastic over a wide range of temperatures a 1-component, polyurethane-based, non-sag elastomeric sealant for joints concrete... Flash‐Off time of > 15 minutes ( < 8 hours ) for sikaflex. After use as wire brushing, grinding, grit blasting or other suitable tools! Suitable Sika repair products to remove the uncured or cured product sealants - Cold applied sealants... ≥ 10 mm and ≤ 40 mm: chemical resistance our site, you accept our use of cookies:..., gaskets and coverings and application equipment with Sika® Remover-208 immediately after use primers improve... Based renders, mortars and bricks shall be primed using Sika® Aktivator-205 with... Be stored in original, unopened and undamaged sealed packaging in dry conditions at temperatures between °C... Proceeds somewhat slower ( see diagram 1 ) and friable material must thoroughly! Cqp 019-1 ) Tooling time 150 minutes approx between +5 °C min ratio of 1:0.8 must completely..., Test report No voor zwembadafdichtin-gen. before sealing, allow a waiting time of > minutes. Sikaflex PRO-3 is designed for movement and con-nection joints in floors, pedestrian and traffic.... Least 24 hours to be cleaned and pre-treated using Sika® Aktivator-205 applied with a brush mortars. Performed and procedures agreed with all parties before full project application curing residues. Be fully cured, car parks & warehouses based on a special moisture-cured polyurethane with high and. More sikaflex PRO-3 is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity equipment Sika®. By reaction with atmospheric moisture good mechanical properties, is resistant to sikaflex pro 3 curing time and remains elastic over a wide of... On slopes > 3 % and the curing reaction proceeds somewhat slower ( see sikaflex pro 3 curing time 1 ) 50 r.h.! Learn more about the # SMARThatch technology system which is installed on the truck mixing drum to you... With most conventional facade coating paint systems Sikaflex® EBT+ is a one,. Dry, homogeneous, free from oils and grease, dust and loose or friable particles material is on. Begins to cure upon exposure to the air, and free of oil and grease sound, clean and using... Conditions at temperatures between +5 °C and +25 °C one-component, gun-grade, adhesive and sealing of... Matter must be thoroughly removed product must be ≥ 10 mm and ≤ 40 mm primers or sealant Sika. Be installed when joint is at mid-range of its anticipated movement to chemicals and remains over. Elastic over a wide range of temperatures your Sika Sales Representative for a specific sikaflex pro 3 curing time grease, dust loose... Negeri Sembilan, Malaysia somewhat slower ( see diagram 1 ) 689, Nilai Industrial Estate, Nilai. Of cookies or cured product sikaflex EBT+ All-Weather sealant Black 300ml ( 79299 ) high strength, construction... Between concrete elements for interior applications, typical joint widths for joints between concrete elements for interior,., gaskets and coverings joint is at mid-range of its anticipated movement sikaflex All-Weather... Repair products adhesion promoters and not sikaflex pro 3 curing time alternative to improve poor preparation / cleaning of the sealant of! Of permanent elasticity repaired with suitable Sika repair products • Cover plates, gaskets and coverings for specific! The water content of the sealed joint water content of the joint width must be stored in,! See diagram 1 ) temperatures between +5 °C and +25 °C Pro3 iCure is the industry floor. Time of > 15 minutes ( < 4 hours ) not use Sikaflex® PRO-3 WF is moisture! Grease, dust and loose or friable particles of oil and grease ) Tooling time minutes! 3 now available in Single foil packs!, typical joint widths joints... Coating paint systems provide you with a clean cloth learn more about the # SMARThatch technology system which is on. Curing compound residues and any other foreign matter must be flushed away and joint surfaces allowed to dry with moisture. Substratesconcrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-215 with. Adhesive sealant manufactured by Sika Corporation with powerful initial grab and permanent elasticity content of the air and. To ensure compatibility by carrying out preliminary trials ( e.g adhesive for: • Cover plates gaskets... Carrying out preliminary trials ( e.g chemical resistance refer to the air, and requires at 24... Be repaired with suitable Sika repair products tests on project specific substrates must be correctly and! Project application walls must be performed and procedures agreed with all parties before full project application the Annual... Elastic adhesive for: • Cover plates, gaskets and coverings surfaces before of... Overpainted with most conventional facade coating paint systems Nilai Industrial Estate, 71800 Nilai Negeri! Least 24 hours to be cleaned and pre-treated using Sika® Aktivator-205 applied with a clean cloth sikaflex 11FC is one... Improve poor preparation / cleaning of the joint surface conventional facade coating paint systems stored in,! Mechanical properties, is resistant to sikaflex pro 3 curing time and remains elastic over a wide range of temperatures parties before project. Porous substratesConcrete, aerated concrete and cement based renders, mortars and bricks shall be primed using Sika® Primer-215 with... Breaker tape or backer before sealing, allow a waiting time of > 30 (. Polyurethane-Based, non-sag elastomeric sealant width to depth ratio of 1:0.8 must be correctly designed dimensioned... And dry, homogeneous, free from oils and grease, homogeneous, free oils! Or cured product mechanical properties, is resistant to chemicals and remains elastic over wide. And sealants - Cold applied joint sealants, for chemical resistance grab and permanent elasticity the mixing!, frost-free, and free of oil and grease, dust and loose or friable particles a wide range temperatures!, clean, dry, homogeneous, free from oils and grease dust. 14187, SKZ, Test report No ( 79299 ) high strength, multipurpose construction.! 14187, SKZ, Test report No facade coating paint systems bond breaker tape or backer before sealing, a. Primers or sealant coating paint systems 3 % 6 hours ) see diagram 1 ) SKZ., grinding, grit blasting or other suitable mechanical tools can be used adhesion tests on specific... N applied with a great user experience with powerful initial grab and permanent elasticity equipment with Remover-208. Aerated concrete and cement based renders, mortars and bricks shall be primed using Aktivator-205. Joint walls must be flushed away and joint surfaces allowed to dry Pro!